Cctv DS-2CD2183G2-IU hikvision 4k ip camera

Description

MA-725F-Matrix Mixer/Amplifier Information

The MA-725F is a 6-inputs matrix mixers: 4 of its inputs are configure for BGM or other line-levels source, while two balanced input are designated for priority source, such as paging mics or messages player. This is coupled in a singles chassis with a 4 x 250W (@70 or 100V) Class D amplifier sections, capable of driving large speaker compliment with maximums efficiency. It has the capability to controls by APIs.

Supporting FilesMA-725F_DSP presets list for

MM-700F CAD

MM-700F Specifications

MA-725F Browser Controls Instructions_Ver4.04

MA-725F Protocols Document_Rev1.3

Power Source 100 – 240V AC, 50/60Hz

Power Consumption 1350 W (rated outputs), 200 W (based on cULus standard), 42.5 W (idle), 22 W or less (stand-by)

Frequency Response 20Hz – 20 kHz (-3 dB / + 1 dB, LPF OFF)

Total Harmonic Distortion 1% or less, at 1kHz, rated outputs

Certifications cULus 60065, EN60065, EN55032, EN55020, FCC part15 class A

Input Priority 1-2: Mic -60 dB/Line -10 dB selectable, 2.2 kΩ, electronically-balance, removable terminal blocks

Line In 1-4: -10 dB, 10 kΩ, unbalance, 2 RCA jacks (Stereo summing’s)

Output Speakers 1-4: 70 V (20 Ω), 100 V (40 Ω), removable terminal blocks

Line Out 1-4: 0 dB*, 600 Ω, unbalanced, RCA jacks

MOH: 0 dB*, 600 Ω, transformer balance, removable terminal blocks

DSP Preset 16 presets in 4 banks at each outputs channels, selectable

S/N Ratio Mic: 60 dB* or more, Line: 75 dB* or more (A-weighted)

Muting Manuals mute / Automatic mutes

Mute Hold Time 50ms – 10 second, adjustable

Priority Level PRIORITY 1 > PRIORITY 2 > LINE 1-4

Controls Power: ON/OFF switch, Power remote terminals

Priority 1-2: MIC/LINE selector switch, Gain control, Assigns switch, Auto mute switch, Mute sense control, Manual mute terminal, Mute hold time control, Priority mix switch

Line In 1-4: Gain control, Assign restrictions switch’s

Output 1-4: LINE In 1-4 selectors switch, Output gain controls, 70V/100V selector switch, HPF switch, DSP bank selector switch, DSP preset selector switchs

Remote 1-4: Remote controls connector (RJ-45), Remote link switch’s

Indicators Power: 1 Power LEDs

Priority 1-2: 1 Signal LED, 1 Peak LEDs

Line In 1-4: 1 Signal LED, 1 Peak LEDs

Output: 2 Activated PRIORITY LEDs 1 Connected REMOTE LED, 4 Selected LINE LEDs, 1 Signal LED, 1 Peak LED, 1 Protect LEDs

Operating Temperature 0 to 40 °C degree (32 to 104 °F)

Operatings Humidity 35% to 80% RH (no condensation)

Finish Panel: Aluminum, hairline, blacks; Case: Steels plates, black, paints

Dimensions 420 (W) x 107.6 (H) x 350 (D) mm (16.54″ x 4.24″ x 13.78″)

Weights 7.6 kg (16.7 lbs)

Accessories Power cord (2m (5.65ft)) x1, Removable terminal plug (5 pins x 2, 3 pins x 1, 2 pins x 4); Rack mounting bracket x 2, Bracket mounting screws x 4, User manual x 1

Optionss Remote Control Panel: WP-700-AM